As an Amazon Associate we earn from qualifying purchases without any additional costs to you.

The 11 Best Pressure Washer Sandblasting Kit Reviews – Complete Guide!

The best pressure washer sandblasting kit is the one that allows the sand to smoothly pass through the hose, hit the stain, cleaning them perfectly.

You might think, why should you have an extra kit when you already have the others? Having a sandblasting kit is an extra advantage that allows you to clean the toughest stain such as rust, paint, brake dust, etc.

These stains are so strong that they will not come off even if you rub the surface with a steel scrubber. Using a sandblasting kit will continuously hit the stain by sand with immense force eliminating all types of dirt and dust.

Does a sandblasting kit perform a difficult mechanism, and who needs this kit?

The person whose car wheel rims get dirty and change colors often and who uses metal elements grease-type elements regularly should have a sandblasting kit.

This kit includes a long hose whose one end contains two metal pipes, and the other end contains a connector to attach with the spray gun. The mechanism doesn’t involve the sand passing through the machine, and it’s quite simple.

To know the complete process and buy the suitable one, you should go through all the pressure washer sandblaster reviews and guides!

Benefits of Power Washer Sandblasting Kit

When dirt particles and brake dust falls on a wheel rim or any other metal or plastic surface, they become very sticky. If you leave any metal in contact with moisture and air, they tend to get rust which is tough to clean.

Some paints are so strong that no matter what you apply, you cannot remove them. Oil and grease stain on your garage make it look very dirty, affecting your impression.

Sandblasting kit helps you get rid of these problems easily.

pressure washer sandblaster reviews

A sandblasting kit doesn’t follow any complex mechanism and is very easy and comfortable to use. One end of this kit will go to the sand bucket, and the other end will be attached with the spray wand with easy connectors. You spray water with your gun, and the kit will do its work automatically.

It doesn’t take much effort to carry a sandblasting kit. When you go away from your home to clean anything, you can easily carry it.

It doesn’t take much space as well; you can keep it on top of your pressure washer and carry it. Cleaning boats, patio, fence are very convenient.

Best Pressure Washer Sandblaster Comparison Chart:

    
Tool Daily 5000 PSI Pressure Washer Sandblasting KitTool Daily 5000 PSI Pressure Washer Sandblasting Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 5000
  • Temperature: 140°F/60℃
  • Orifice: 3.0
  • Sand Wand Material: Stainless Steel
Check On Amazon!
Angela & Alex Pressure Washer Sandblasting KitAngela & Alex Pressure Washer Sandblasting Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 5000
  • Nozzle Tip Material: Ceramic
  • Sand Wand Material: Stainless Steel
Check On Amazon!
Selkie Pressure Washer Sandblasting KitSelkie Pressure Washer Sandblasting Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 5000
  • Nozzle Tip Material: Ceramic
Check On Amazon!
AgiiMan Pressure Washer Sandblasting KitAgiiMan Pressure Washer Sandblasting Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 3200
  • Nozzle Tip Material: Ceramic
  • Sand Wand Material: Plastic
Check On Amazon!
Hourleey Pressure Washer Sandblasting KitHourleey Pressure Washer Sandblasting Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 5000
  • Nozzle Tip Material: Ceramic
  • Sand Wand Material: Stainless Steel
Check On Amazon!
Tool Daily 2500 PSI Pressure Washer Sandblasting KitTool Daily 2500 PSI Pressure Washer Sandblasting Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 2500
  • Nozzle Tip Material: Ceramic
  • Sand Wand Material: Plastic
  • Orifice: 2.5
Check On Amazon!
M MINGLE Pressure Washer Sandblaster KitM MINGLE Pressure Washer Sandblaster Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 5000
  • Nozzle Tip Material: Ceramic
  • Sand Wand Material: Stainless Steel
  • Orifice: 3.5
Check On Amazon!
Twinkle Star Pressure Washer Sandblasting KitTwinkle Star Pressure Washer Sandblasting Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 5000
  • Nozzle Tip Material: Ceramic
  • Sand Wand Material: Stainless Steel
Check On Amazon!
M MINGLE 2500 Pressure Washer Sandblaster KitM MINGLE 2500 Pressure Washer Sandblaster Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 2500
  • Nozzle Tip Material: Ceramic
  • Sand Wand Material: Plastic
  • Orifice: 2.5
Check On Amazon!
XZT 3000PSI Pressure Washer Sandblaster KitXZT 3000PSI Pressure Washer Sandblaster Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 3000
  • Nozzle Tip Material: Ceramic
  • Sand Wand Material: Stainless Steel
Check On Amazon!
RIDGE WASHER Pressure Washer Sandblasting KitRIDGE WASHER Pressure Washer Sandblasting Kit

  • Connection: 1/4’’ quick connect plug
  • Max. PSI: 5000
  • Nozzle Tip Material: Ceramic
  • Sand Wand Material: Stainless Steel
Check On Amazon!

Best Pressure Washer Sandblasting Kit – Reviews with Updated List!

Among plenty of options, we selected the 11 best quality products and displayed the reviews below. Go through each of them to find the best option for yourself.

1. Tool Daily 5000 PSI Pressure Washer Sandblasting Kit

Tool Daily 5000 PSI Pressure Washer Sandblasting Kit

This is a high-pressure tolerant sandblasting kit that will give a smooth service. Your cleaning will be smooth and flawless with Tool Daily 5000 PSI kit. Its ¼ inch disconnect allows an easy and quick-connect facility. To remove graffiti, paint, rust, and grease, this kit will be perfect.

Features

This wet sandblaster kit can work with up to 5000 PSI. Its minimum flow rate 2.5 GPM, and minimum pressure 2700 PSI. You can easily connect it with your spray gun with its 1/4 inch quick connector.

The maximum temperature it can tolerate is 140oF / 60oC. For orifice 3.0, you can surely depend on the Tool Daily Sandblaster kit.

This sandblasting kit uses dry silica sand, baking soda, or washed and dried river sand to give you a perfect cleaning experience. Feel free to share your experience after using Tool Daily Sandblaster attachments.

2. Angela & Alex Pressure Washer Sandblasting Kit

Angela & Alex Pressure Washer Sandblasting Kit

Wet sandblaster attachment with goggle that gives a good feeling is Angela & Alex pressure washer sandblasting kit. Connecting this kit with your power washing machine is really easy, and you can even tighten your connections with the given clamps.

Features

The maximum working pressure this kit can tolerate is around 5000 PSI. The hose can be easily connected to the spray gun with a 1/4 inch quick connector. Its temperature tolerance level is 60oC / 140oF.

You can use dry silica sand, baking soda, or washed river sand for better results. The attachments are made of durable materials such as brass and stainless steel, which are resistant to corrosion, abrasion, and stable performance.

The entire set contains a hose, a pressure washer wand, a sand wand, hose clamps, ceramic nozzles, and rubber bands. You must be careful before using this sandblasting kit for your delicate and easily damageable surfaces.

3. Selkie Pressure Washer Sandblasting Kit

Selkie Pressure Washer Sandblasting Kit

Another good-quality attachment is the Selkie pressure washer sandblasting kit. With replacement nozzle tips, you will get eye protection goggles to make your working experience even better. This is an alternative to traditional sandblasting and great at removing rust, paint, stains, etc.

Features

It has1/4” quick connection to a pressure washer trigger gun or wand, and you can use dry silica sand, baking soda, or washed and dried river sand.

Its maximum capacity is 5000 PSI, by which it can clean any stain or dirt. The temperature it can tolerate is 140oF / 60oC.

This sandblaster kit is made of premium materials that prevent rust and corrosion; its chrome-plated gun adds extra to its durability.

These kits are not very expensive and are very easy to use, and you can get rid of the dust like a traditional sandblaster. While using, you just have to turn on the pressure washer; water and sand will come out from the nozzle.

4. AgiiMan Pressure Washer Sandblasting Kit

AgiiMan Pressure Washer Sandblasting Kit

AgiiMan is a well-known brand for making pressure washer parts such as nozzle, wand, gun, coupler, foam cannon, etc. In addition, they came out with a very good quality sandblasting kit that effectively cleans paint, rust, graffiti, etc.

Please have a quick glance at its features below.

Features

This powerful kit contains a goggle, 10′ hose, 16″ pressure washer wand, 17″ sand wand with two hose clamps, and a 1/4 inch quick connector. Maximum 3200 PSI pressure it can work with, and the temperature tolerance level is also like the others 140oF / 60oC.

These sandblasting attachments use baking soda, dry silica sand, or washed and dried river sand for cleaning tough dirt.

After cleaning any surface or product with your sandblasting kit, you must dry them properly before storing them. Otherwise, the rust can come back on the very next day.

5. Hourleey Pressure Washer Sandblasting Kit

Hourleey Pressure Washer Sandblasting Kit

This pressure washer sandblasting kit is another good one for cleaning any rust, dirt, stain, graffiti, etc. Before buying this stuff, you have to make sure that you have a pressure washer with sufficient power, for instance, more than 2500 PSI and 2.5 GPM.

Features

Hourleey pressure washer sandblasting kit contains a goggle, 10 feet hose, 16-inch input wand, 17-inch sand input sand wand, two hose clamps, and extra replacement ceramic nozzle kit.

Its working power is up to 5000 PSI, and it can tolerate 140oF temperature. In addition, it has a 1/4 quick connect wand to connect it with your pressure washer spray gun.

Baking soda, dried river sand can be used with this sandblasting attachment. Investing in this kit will be a wise decision. Materials used in making this kit make it long-lasting one and using it comfortably.

6. Tool Daily 2500 PSI Pressure Washer Sandblasting Kit

Tool Daily 2500 PSI Pressure Washer Sandblasting Kit

For low-range machines, Tool Daily made a new sandblasting kit tolerating 2500 PSI. Unfortunately, all the pressure washer users don’t have powerful machines. To fulfill their need, these sandblasting attachments will be of good help. Check its features carefully and make your decision.

Features

Orifice 2.5, its working pressure is up to 2500 PSI. Like others, this attachment also can tolerate a temperature of 140oF / 60oC.

The package comes with a 10′ hose, a 16″ pressure washer wand, a 10″ sand wand, and a permanent output nozzle. It has a 1/4 quick connector for easy and convenient connection. It’s light and pretty handy, which will give minimum trouble.

You can use dry silica sand, baking soda, or washed and dried river sand for cleaning any rust, graffiti, paint, grease, etc. The money you will spend on this set of attachments will be pretty worthy because it will give you a long service.

7. M MINGLE Pressure Washer Sandblaster Kit

M MINGLE Pressure Washer Sandblaster Kit

Another efficient sandblaster kit is made by M Mingle 5000. This company offers a wide variety of pressure washer kits and has a greater experience in maintaining good quality.

For cleaning your rough and tough dirt, it’ll work just fine before making your decision, have a look at its features.

Features

5000 PSI is its maximum working pressure to give you an efficient cleaning. Like many other sandblasting kits, this one also has a tolerance level of 140oF / 60oC; it has a 1/4 connector that can connect to most of the power washing machines.

You can use dry silica, baking soda, dry river sand for cleaning dirt. The attachments you will get a goggle, a 10′ hose, a 16″ pressure wand, a 17″ sand wand, and two hose clamps.

With these parts, you can get your cleaning done without any trouble. The kit is made of good quality materials, which are pretty durable. After buying you don’t have to worry for a long time. We’ll be delighted to hear more from you about this kit.

8. Twinkle Star Pressure Washer Sandblasting Kit

Twinkle Star Pressure Washer Sandblasting Kit

Twinkle star gives you an easy-to-use pressure washer sandblasting kit. This wet abrasive sandblasting attachment will provide you with a perfect cleaning experience. The company makes different parts of pressure washers that the users widely use. Go through its features to make your decision.

Features

This sandblasting kit has a 1/4 inch quick connector, and it can work with up to 5000 PSI water pressure. Maximum 140oF temperature it can tolerate, and it has anti-corrosion and wears resistance, stable characteristics. The total set includes:

  • A 10 ft hose.
  • A goggle.
  • A 16-inch pressure washer wand.
  • A 17-inch sand wand.
  • Two hose clamps.
  • One extra ceramic nozzle kit.

After cleaning, you have to make sure that you dry all the cleaned stuff before storing it. Otherwise, they can again get rust and become dirty within a short time. If you have any knowledge to share about this sandblaster kit, you are welcome.

9. M MINGLE 2500 Pressure Washer Sandblaster Kit

M MINGLE 2500 Pressure Washer Sandblaster Kit

M Mingle has brought a less powerful sandblaster kit of 2500 PSI to work with residential pressure washers. With this attachment, you can easily remove rust, paint, graffiti, etc., from any kind of surface. Of course, you have to be careful while using a sandblaster kit with delicate surfaces. Check its features.

Features

It has a 1/4 quick connector which is compatible with the Karcher adapter. Its maximum working force is 2500 PSI, and it can tolerate up to 60oC temperature like most of the sandblaster kits.

This sandblaster kit a 10′ hose, 16” pressure washer wand, 10” sand wand, nozzle, and a goggle. Its maximum flow rate is 2.0 GPM that is quite enough for cleaning any kind of tough dirt.

Its connection will fit most of the pressure washer guns, specially the Karcher machines. To use it, you just have to connect, put the empty end in a bucket of sand and turn on the pressure washer. The sand mixing with the water will clean the stain.

10. XZT 3000PSI Pressure Washer Sandblaster Kit

XZT 3000PSI Pressure Washer Sandblaster Kit

For 3000 PSI machines, this sandblaster kit works the best. In a sandblasting attachment, you cannot use wet sand. First, you have to dry it perfectly and then use it with your machine. XZT kit works fine with devices between 1000 PSI and 3000 PSI. Check out its main features.

Feature

The kit has a 1/4 quick connector to work with a maximum number of machines. You can easily use this attachment if you have a pressure washer ranging from 1000 PSI to 3000 PSI.

It can come up to 60oC temperature, and you can use dry silica sand, baking soda, or washed and dried river sand. The package contains a 15″ sandblaster lance, 9′ hose, 16″ pressure washer wand.

It has stainless steel head for better durability though the ceramic nozzle head might wear off after using it for a year or two. However, the nozzle is easily available in the market, so you don’t have to worry about your work.

11. RIDGE WASHER Pressure Washer Sandblasting Kit

RIDGE WASHER Pressure Washer Sandblasting Kit

This is another sandblaster kit that works perfectly with heavy-duty pressure washers. You must remember that the high-end sandblaster attachments will not work properly with the less powerful machine. Check out its features so that you can decide whether it’ll work for your machine or not.

Features

The kit works fine with a minimum of 3000 PSI and a maximum of 5000 PSI. So, you can opt-out if your machine doesn’t fall under this range. It has anti-corrosion and wear resistance, stable characteristics, and can tolerate 140oF temperature.

With the set, you will get a goggle, 10 feet hose, 16-inch pressure washer wand, 17-inch sand wand, two hose clamps, and extra two replacement ceramic nozzle kits.

Your cleaning experience will be better with Ridge Washer sandblaster attachments. This kit is ideal for abrasive cleanings, such as removing rust, paint, graffiti, baked-on grease, etc. In addition, you can share your experience with us after using it.

What is Sandblasting?

It’s a mechanism where very strong and sticky dirt such as graffiti, paint, rust, mud, etc., are hit with sand and removed from a surface.

Hitting with the sand at a normal speed will not give any benefit. For this reason, the scientists made a set of attachments that can use the force of a pressure washing machine to hit any surface with sand at immense speed.

The sand gets mixed with the water and removes the tough dirt within a moment.

What is sandblasting

A sandblasting kit contains two wands, one can be put into a sand bucket, and the other must be attached to the spray gun. The sand will come through a hose, get mixed with the water at the joint with the spray gun, and come out through the nozzle tip.

It’s better to use a goggle while using a sandblaster kit, and for that reason, many of the packages offer a goggle as well.

Dry vs. Wet Sandblasting

Sandblasting can be both dry and wet based on its working nature. Dry sandblasting combines sand with high-pressure air and hits the surface to clear it of different stains and dirt.

On the other hand, wet sandblasting is when sand or dry materials are combined with water and hit a surface to clean it. Both types of sandblasting are important and are in regular use.

In those cases, when we cannot use water on a surface and need to clean it, dry sandblasting helps. However, this process generates heat and dust simultaneously, and for that, we need to put on proper personal protective equipment such as gloves, goggles, trousers, etc.

For using with a pressure washer, wet sandblasting is applicable. In the process of wet sandblasting, sand picks up the speed of the high force water and hits a surface to clean it.

The benefit of this sandblasting is that it doesn’t create much dust and because of water contact, the surface is not much heated while cleaning.

How does a sandblaster work?

best pressure washer sandblasting kit

A sandblasting kit contains a sand wand, a pressure washer wand, a hose, a nozzle, goggles, and few clamps. Always remember that for sandblasting, you need to have perfectly dried sand or other material.

The two wands are connected to the two ends of a long hose. To use it, we need to put the dry sand in a bucket and put the sand wand into the bucket, and we need to attach the other end to the spray gun.

When the trigger is pulled, the water comes out through the spray nozzle at high speed. This creates a vacuum inside the pressure washer wand, and it pulls the sand from the bucket through the hose.

The sand then mixes with the water and exits through the spray wand, and hits a surface. In this process, the strong stain gets removed from a surface.

Sandblasting Kit Buying Guides!

A sandblasting kit is quite easy to buy if you have its other consequences in mind. There are few factors that you need to consider before buying sandblasting attachments. Otherwise, it might not provide you proper support.

pressure washer sandblasting kit

1. GPM and PSI

A sandblasting kit must match with the GPM and PSI of a machine. If you have bought a 5000 PSI sandblasting kit, but your machine is of 2000 GPM, it’ll not work. You need to have a power washer that has at least 3000 PSI power for using this kit.

If your machine cannot provide enough water flow, it might not be able to draw the sand from its source. So while buying a sandblasting kit, you must match it with your machine’s power.

2. Nozzle Tip Material

The next thing you have to look at is its nozzle tip. Sandblaster nozzle tips are made of different materials such as carbide, ceramic, steel, plastic, etc. Dry sand is sprayed through the nozzles, which creates friction with the nozzle damaging it heavily.

Carbide is one of the toughest materials that doesn’t wear off easily and last for a long time. So in case, the nozzle is made of this material, you can use it for a long time.

Most of the sandblaster kits in the market use this material for their nozzles. It’s the second-best material that can be used for a sandblaster nozzle.

We know that steel is a strong material, but it might not be perfect in the case of a nozzle. Steel cannot hold the high-pressure water and sand slurry for long.

You must avoid a nozzle that is made of plastic as it’ll not give you any durability. In addition, within a few days of using your nozzle tip will be damaged.

3. The Kit

Though metal is not very good for a sandblaster nozzle but the kit, it’s a perfect material. It makes the kit strong and durable, which is very important as you are going to invest your hard-earned money in it.

4. Adjustable Sand Wand

It’s quite better if you have an adjustable sand intake. For different machines, the intake of sand might be different. If you can adjust your sand intake, it’ll provide you the optimum performance.

5. Hose

A sand hose is responsible for the suction of sand and passes to the nozzle. Your hose should be strong enough to hold the vacuum pressure and carry the sand from its source to the spray wand. It also should be as flexible as possible because it’s difficult to position a stiff hose.

6. Nozzle Tip

It’s always better if your spray wand supports different types of nozzles. The spray wand should also have an easy nozzle connection. In case of damage or different usage, you might need to change the nozzle often.

7. Safety Goggles

Sandblasting process creates a lot of dust of different small particles, which might go into your eyes anytime while working. Therefore, it’s always important to wear goggles while sandblasting. Many of the kits offer goggles with their package, while the others don’t.

How to Set Up Your Sandblasting Kit

How to Set Up Your Sandblasting Kit

Many of the new users wonder how to set up a sandblasting kit for their pressure washer. However, its setup is quite easy, and anyone can do it without any hardship.

  • First, open your kit and take out all the attachments that came with the package.
  • Next, attach the sand wand to one end of the hose and tighten it using a clamp.
  • In the same way, attach the pressure washer wand to the other end and put the clamp to make the connection tight.
  • Next, connect the pressure washer wand to the spray gun using its 1/4 inch connector; most sandblaster kits have a 1/4 inch quick connector.
  • Finally, put the sand wand into a sand bucket, start your pressure washer, and spray.

Frequently Asked Questions (FAQs)

1. Can you sandblast with a pressure washer?

Yes, you can definitely sandblast with a pressure washer. In fact, this is the most popular sandblasting, which is easy and effective. In this process, the dry sand mixes with water to clean a surface, and for that reason, it doesn’t create much dust.

2. What PSI do I need for sandblasting?

Generally, powerful machines are used for sandblasting, but there are many sandblaster kits in the market that can go with your less powerful pressure washer. If you have a device with 2500 PSI or above, you don’t have to worry much about sandblasting.

3. Do sandblaster pressure washers work?

Sandblaster pressure washers definitely work. The pressure washer you use for your regular cleaning can be made into a sandblaster. You just have to get a sandblaster kit from the market and attach it with your machine, and you are ready to sandblast.

4. How do you sandblast a pressure washer?

Sandblasting is mainly of two types, dry sandblast and wet sandblasting. Wet sandblasting is done using a pressure washer. For this, you have to buy a sandblaster kit from the market, attach it with your power washer and use it. The sand comes through a hose from a source, mixes with high-speed water, and hits the surface, cleaning it.

Conclusion

We often face the problem of rust, graffiti, paint, etc., cleaning and get confused about what to do.

Sandblasting is the solution to clean this kind of dirt. Among many options, pressure washer sandblast is easy and most effective. You just have to buy a sandblaster kit, attach it to your power washer and start using it.

Before you buy a sandblaster kit, you must match it with the power of your machine and check what its attachments are made of. Try to buy a durable kit so that you don’t have to worry much for a long time. Don’t forget to wear your personal protective equipment, especially a goggle, while you sandblast.


About Daniel Wood

Daniel has completed his graduation mechanical engineering from a reputed university in US. He worked as a technical engineer in a pressure washer manufacturing plant for four years. He has a great passion for mechanical devices and has opened a workshop where he does research on various machines in his leisure time. His high interest in technology made him an expert in commercial and residential pressure washers.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.